Tubing Notchers & Copers
Pipe Notchers & Tube Notchers

• Two axis precision cross-feed table with operator handle wheels
• Heavy-duty frame and base construction
• Mandrel centerline adjustment

Specifications
Belt	4" x 78-3/4"
Motor	4.0 hp, 220V or 440V 3-phase
Speed	3420 RPM
Belt Speed	98.4 feet per second
Grinding Capacity	3/4" to 3"
Angle Range	0° to 60°
Weight	517 lbs.
Dimensions	59" x 47" x 19-1/2"

	Click here to see video!

 

• Slide bar in-feed control with adjustable cross-feed table
• Top-mounted grinding surface
• Premium abrasive grinding belts dramatically improve work quality on a wide range of materials

Model 2601 Notcher

Power Notcher

• Designed for production applications when many notches have to be made
• Fast set-up time
• For 3/4", 1", 1-1/4", 1-1/2" and 2" pipe
• Available in 220V or 440V 3-phase
• Model available with a vent notching die for quickly creating uniform notches in round or square material
   

  Click here to see video!

   

Notch Master Hole Saw Notcher

Straight


Offset

• Excellent "Bang for the Buck"
• Capacity of 3/4" to 3" OD.
• Angles up to 50°
• All CNC machined
• Heavy duty 1 1/4" thick steel frame.
• 2-axis adjustable tubing clamp.
• Can offset notch up to 1 1/2" vertically.
• 1" Ground & Polished Stainless Steel shaft
• Double sealed needle bearings.
• Easy mounting: Bolt or clamp it to a table or simply clamp it in a vise.
• Uses inexpensive bi-metal hole saws.
• Requires an ordinary 1/2" hand drill
   

Click here to see video!

Versatile Hole Saw Notcher

 
Only $197complete, less hole saw blade.
Industrial unit available for $299.
 Call us and mention web site for special pricing!

• Large capacity and low operating cost

  • Notches 3/4" through 2" O.D. tubing at angles up to 50 degrees in under 15 seconds.

  • Uses commonly available bi-metal hole saws costing approximately $8 each. (A single bi-metal hole saw will typically notch 5 to 10 complete racecars!)

• Easy to use

  • Use with a 1/2" hand drill so it can be used horizontally for greater flexibility -- just clamp it in a vise and go

  • Mounts vertically it in a drill press too

• Superb construction

  • Heavy duty frame with machined-in degree increments

  • Ground and polished stainless steel shaft & rigid bearing block

  • Twin needle bearings and separate grease seals for maximum rigidity and reliability.

  • Strong, accurate tube cradle machined from a solid steel block

  •  Clamp mechanism rides in its own guide and has also been machined from a solid block of steel, eliminating the problems of tube walk in notchers that use a U-strap

• Satisfaction guaranteed

  • 14 day trial period guarantee

  • One year parts and workmanship guarantee

Click here to see video!

Only $325.00, complete,
with one of the four cutter sets.

Additional cutter sets: $120 each.
 Call us and mention web site for special pricing!

• Superior built unit
• Cutting edges are case hardened to 62 rockwell
• Available with 4 sizes of cutters
  1. 1" to 1-1/4" O.D. Tubing
  2. 1-1/4" to 1-7/8" O.D. Tubing
  3. 2" to 2-1/2" O.D. Tubing
  4. 1-3/8", 1-5/8", 1-7/8" Fence Pipe

These tubing notchers are incredibly easy to use.  For straight notches, take a full bite from each side of the tubing.  For angles up to 30 degrees, take a large bite from one side and a smaller bite from the other.  For joints greater than 30 degrees, miter cut the material and notch the sharp side.

Mention web site for discount prices.

• Efficient and productive pipe notching at low cost
• Portable
• Easily mounted to any stationary surface
• Several models available for notching 3/4" to 2" pipe up to schedule 40 wall thickness
• Vent notching model available
• Eccentric shaft and lever system make notches quickly and perfectly every time
   

  Click here to see video!